FanLin Outdoor UPF 50+ Beach Shelter

Product Description

Built for beach days and weekend getaways, this shelter uses silver-coated fabric (UPF 50+) for reliable sun protection. Two ~11 mm foldable fiberglass poles create a stable arch, anchored with sandbags, stakes, and guy lines for security on sand or grass. The rear panel drops for privacy or lifts for airflow, with interior pockets & hook for essentials; it weighs ~8.25 lb and packs to 17.01 × 5.83 × 5.71 in for easy transport.

Key Features

• UPF 50+ Sun Protection: Silver-coated fabric blocks ≈98% of UV rays.

• Dual-Pole Frame: Two 11 mm foldable fiberglass poles for enhanced stability.

• Multi-Point Anchoring: Sandbags + stakes + guy lines—secure on grass or sand.

  Rear Panel, Extend or Stow: Drop for privacy/shade or lift to create a ventilated awning.

Applications

On Grass (Parks / Backyards)

Set up a shaded “living room” in minutes for picnics or kids’ play. The 126″ × 62.4″ footprint provides roughly 55 ft² of coverage, while the 92.4″ peak height creates comfortable headroom. Two ~11 mm foldable fiberglass poles form a stable arch; fix the shelter with stakes + guy lines for reliable hold on turf. The silver-coated fabric (UPF 50+) blocks ≈98% UV, and the rear panel can drop for privacy or lift to boost airflow. Pack down to 17.01 × 5.83 × 5.71 in and ~8.25 lb for easy trunk carry.

On Sand (Beaches / Coasts)

Build a cool, UV-safe basecamp right by the water. Fill the sandbags and pair with guy lines (and stakes where applicable) for multi-point anchoring that resists shifting on soft sand. The same ~55 ft² shaded area helps keep gear and snacks out of direct sun, and UPF 50+ fabric blocks ≈98% of harmful rays. Lift the rear panel to create a ventilated awning that channels sea breezes; drop it when you want extra shade or privacy. After use, the shelter packs to 17.01 × 5.83 × 5.71 in, ~8.25 lb—compact enough for beach totes or the car.

How to Set Up

• Connect the poles

Assemble the shock-corded fiberglass sections into two full-length poles.

• Thread the canopy

Slide each pole through its sleeve/tunnel until the tips reach the end cups.

• Fix the pins

Seat the pole ends onto the base pins/grommets to form the arch.

• Fasten & tension

Clip the buckle and pull the tension straps until the frame is firm. Attach guy lines.

• Anchor by surface

Sand: Fill the sandbags and attach to corners; use guy lines for extra hold.

Grass: Use stakes plus guy lines at the anchor points.

• Finalize

Raise or drop the rear panel for ventilation/privacy. Use interior pockets for small items.

Parameter